[. . . ] [. . . ] Use following Beiter Spacers: - #8-32 (black) 2mm (a) and 5mm (b) - #10-32 (grey) 2mm (a) and 5mm (b) - O-Ring 4x2 for #8-32 (c) - O-Ring 5x2 for #10-32 (c) b c a SHIELD for LEVEL Without Pin (d), with or without break-through, Colours: Black, Red, Green, Orange, Clear With Pin (e), with or without break-through, Colours: Black, Red, Green, Orange, Clear MOUNTING ADVICE To install the shield, first push out the level, than insert the shield (pins backwards) in the device of the scope body. Reinstall and clip in the level. e f d g i h j SIGHT INSERTS Rings and Square in following colours: Black, Red, Green, Orange Rings: 4mm (f), 6mm (i) or 9mm (g) Square: 6mm (j) or 9mm (h) Use the 4mm Ring only on the shield for level without pin!Using sight inserts, the cross in the thread ring should be cut out with small pliers. Werner Beiter Technische Kunststoffteile - Daimlerstraße 18 - D-78083 Dauchingen Tel. +49/7720/85680 Fax+49/7720/4238 www. wernerbeiter. com MADE IN GERMANY e-mail: info@wernerbeiter. com [. . . ] [. . . ]